Electrical flexibility refers to the ability to adjust the level of generation and/or consumption at facilities connected to an electricity grid in order to maintain a balance between supply and demand. It is becoming essential as intermittent renewable energy sources and new uses of electricity develop. The emergence of electricity storage is enabling the development of flexibility.

Electrical flexibility lies at the heart of the mechanisms implemented by RTE to ensure the stability of the electricity system, including the adjustment mechanism, system services and NEBCO (Notifications of Exchange of Consumption Blocks). Underpinning these mechanisms is also a data chain that is essential for identifying sites, measuring consumption or generation, and monitoring the flexibility measures activated.

What is electricity flexibility?

Electrical flexibility is the ability to temporarily adjust the level of generation or consumption, and to utilise storage in line with the needs of the electricity system.

Its importance is growing as the electricity mix changes. Wind and solar power generation depends on weather conditions. At the same time, the electrification of transport, heating and certain industrial processes is altering consumption patterns.

RTE, notably through its electricity consumption flexibility barometer, points out that the operation of the electricity system requires a constant balance between generation and consumption, and that the expansion of renewable energy generation increases the need for flexibility.

Flexibility in the electricity grid can work in both directions:

  • Downward flexibility reduces consumption or generation;
  • Upward flexibility increases consumption or generation when the system requires it or when there is an abundance of available electricity.

What are the flexibility mechanisms within the electricity system?

There are several ways of introducing flexibility into the system. These relate to generation, consumption or storage.

Flexibility in electricity generation

Controllable generation sources can increase or reduce their output in line with the needs of the electricity system. The modulation of certain generation sources has historically been a key factor in maintaining the balance between supply and demand.

Flexibility in electricity consumption

Consumption flexibility involves temporarily reducing, increasing or shifting consumption in industry – particularly in energy-intensive sectors – or in commercial buildings.

Load shedding refers to a temporary reduction in consumption.

Storage and grid flexibility

Storage makes it possible to decouple generation and consumption over time. For example, electricity can be stored in the middle of the day in summer when solar generation is abundant and consumption is low. The stored electricity is then released in the early evening when consumption rises and solar generation is lower.

Local flexibility measures can also help manage congestion on transmission and distribution networks. In July 2026, the CRE approved the rules for a joint pilot market run by RTE and Enedis, based on the ‘Flexibility Portal’.

How is electricity flexibility valued?

Various mechanisms enable flexibility capacity to be mobilised and utilised according to the need it meets. A single resource may have characteristics compatible with several mechanisms, subject to their respective rules.

PurposeMechanismActor performing itConcerned network operator
Valuing load on marketsNEBCO: valuation on modulation marketsDemand-side operator (aggregator or consumer)RTE, and the DSO for sites connected to the distribution network
System balancingAdjustment mechanism: modulating production or consumption, upwards or downwards, to meet system needsAdjustment actors (producers, consumers, aggregators)RTE, and the DSO for sites connected to the distribution network
Real-time balancingSystem services: making primary and secondary reserves availableReserve managers (producers and other qualified actors)RTE, and the DSO for sites connected to the distribution network
Security of supplyCapacity mechanism: remunerating the availability of production, storage and demand-response capacities during peak periodsCapacity operators and obligated parties (including suppliers)RTE and the DSO for the certification of connected capacities
Targeted demand response supportDedicated demand-response schemes: contractual schemes remunerating the availability or activation of demand responseDemand-response operators, aggregators and participating consumersDepending on the scheme, mainly RTE

Who are the key players in electricity flexibility?

Flexibility relies on an ecosystem of interdependent stakeholders.

  • RTE, the transmission system operator, is responsible for maintaining the balance of the electricity system and operates several associated market mechanisms.
  • Distribution system operators (DSOs), including Enedis and local distribution companies (LDCs), manage the networks to which many sites participating in the mechanisms are connected.
  • Demand response operators and aggregators pool or manage consumption or generation capacity.
  • Suppliers sell electricity to consumers and are involved in certain transactions associated with these mechanisms.
  • Balancing managers are responsible for maintaining the balance between injection and withdrawal within the areas under their responsibility.

These roles involve a significant exchange of information between the parties involved.

Why metering data is at the heart of electricity flexibility?

Flexibility can only be properly taken into account within a mechanism if the sites concerned are identified and if the data required to monitor it are available.

The process therefore begins with the identification of the metering points or PRMs participating in a mechanism. These are linked to the relevant stakeholders and areas. The data exchanged must then be verified and the necessary metering information made available in accordance with the applicable rules.

Once the processing has been completed, the results and regulatory files must be sent to the relevant stakeholders.

The DSO plays a key role in this data chain, particularly when a large number of points connected to its network participate in the mechanisms. For an ELD, the increase in the number of sites and data exchanges therefore leads to a need to standardise imports, checks, area linkages and publications.

How Sésame helps network operators manage flexibility?

Sésame is Altsis’s SaaS solution designed to manage transactions between distribution system operators (DSOs) and flexibility providers. The version presented by Altsis currently supports three mechanisms: the balancing mechanism (MA), NEBCO and system services (SSY).

Sésame enables the network operator to manage the stakeholders and entities within its territory, to import the connection and disconnection files associated with the mechanisms, to carry out consistency checks on the imported data, and to generate and publish the files intended for the relevant stakeholders.

This approach addresses a practical challenge: standardising a regulatory exchange process involving several mechanisms, stakeholders and site areas, whilst providing the DSO with a structured overview of the relevant PRMs.

FAQ on electricity flexibility

Why does the electricity grid need flexibility?

The electricity grid must constantly maintain a balance between generation and consumption. With the growth in variable wind and solar generation and changing patterns of electricity use, the need for adaptation is increasing. Flexibility makes it possible to adjust generation, consumption and storage to help maintain this balance.

Why does the demand for electricity vary?

Consumption varies depending on the time of day, the season, the weather and usage patterns. Household habits, economic activities, electric heating and vehicle charging all influence the consumption curve. The gradual electrification of various uses is also changing its structure and creating new sources of flexibility.

What are the challenges facing a flexibility aggregator?

An aggregator pools capacity from several sites so that they can participate in the available mechanisms. This involves, in particular, identifying the sites and managing their allocation to the appropriate areas. The mechanisms then impose specific rules governing participation, metering and monitoring.

Electrical flexibility therefore does not rely solely on physical infrastructure capable of generating, consuming or storing electricity in different ways. It combines technical levers, market mechanisms, stakeholders and a reliable data chain.

For network operators, this transformation involves handling increasingly structured exchanges between RTE, market participants and connected sites.

With Sésame, Altsis provides distribution system operators (DSOs) with a tool specifically designed for managing market participants and operational areas.

For a DSO wishing to standardise these processes, a demonstration of Sésame allows them to see first-hand how it works and how it integrates into the network operator’s business processes.

You may be interested in these articles

  • Prevention digitalisation

    Risk prevention plan: obligations and implementation

    The risk prevention plan is the reference document that governs the activities ofexternal companies working on a construction site for a user company, in order to control the risks of simultaneous activities (interference between activities, installations and equipment). It formalises the analysis of hazards, preventive measures, the organisation of emergency services, and the cross-functional responsibilities…

  • Incident management software: an essential tool

    An incident management software also centralises the management of service requests, enabling technical teams to deal with reported incidents more quickly. Networks — electricity, gas, water, public lighting and telecoms — are becoming more complex to operate every year. Between the increase in connected equipment, stricter regulatory requirements and the need to ensure flawless service…

  • ALTSIS prevention plan

    Risk prevention plan: analysis and implementation

    In an industrial or electrical environment, risk management is not just a regulatory requirement enshrined in the Labour Code: it is an essential condition for ensuring the safety of the team and business continuity.The involvement of 3rd party external companies further increases this complexity by introducing new hazards, often unknown to the client. The risk…